Alpine CDA-7939R - Page 16

Xo fe|[s),@) oy-Irelifoja
English
Manual Storing of Station
Presets
. Tune in the desired radio station you wish
to store in the preset memory.
2. Make sure that the FUNC indicator
illuminates, and press any one of the
preset buttons (1 through 6) for at least 2
seconds until the frequency display
blinks.
3. Press the preset button into which you
wish to store the station while the display
is blinking (within 5 seconds).
The display changes from blinking to
steady lighting indicating that the station
has been memorized. The preset number
is also displayed.
4. Repeat the procedure to store 5 other
stations onto the same band. Use this
procedure for other bands.
A total of 30 stations can be stored in the
preset memory (6 stations for each band;
FM1, FM2, FM3, MW, LW). The RDS
stations can be preset in the FM1, FM2 and
FMS bands only.
Note: If a preset memory has already been
set in the same preset location, it wilt
be cleared and the new station will be
memorized.