Do you have a question about the Alpine CDA-9833 and is the answer not in the manual?
Power Output (RMS) | 18W x 4 |
---|---|
Maximum Power Output | 50W x 4 |
Channels | 4 |
CD Playback | Yes |
MP3 Playback | Yes |
WMA Playback | Yes |
Tuner | AM/FM |
Remote Control | Yes |
Preamp Voltage | 4V |
Built-in Crossover | Yes |
Time Alignment | Yes |
Subwoofer Control | Yes |
Bluetooth | No |
USB Port | No |
Aux Input | No |
Detachable Faceplate | Yes |
CD Text Display | Yes |
Preamp Outputs | 3 (Front, Rear, Subwoofer) |
EQ Settings | 5-band parametric |
Display Colors | Variable |
Basic procedures for powering the unit on and off.
Steps for the first-time use of the unit.
Playing audio discs and managing playlists.
Adjusting audio balance, fader, and sound defeat.
Understanding and configuring speaker crossover settings.
Saving and loading custom equalizer settings.
Saving and loading custom crossover configurations.
Explanation of the audio time delay correction feature.
Step-by-step guide for downloading data to the unit.
Basic operation of the XM radio receiver.
Selecting, storing, and searching XM channels.
Introduction to integrating portable telephones via MobileHub™ Link.
Managing phone calls, modes, and volumes.
Making calls using the address book and speed dial.
Basic operations for controlling a connected CD changer.
Basic controls for power, source selection, and playback.
Resolving common problems with the unit and radio reception.
Safety guidelines for installing the unit in a vehicle.
Important points for making proper electrical connections.
Diagram and explanation for power, antenna, and speaker wiring.
Wiring for auxiliary devices and CD changers.
Specifics on connecting amplifiers and control signals.
Details on connecting speakers and RCA audio outputs.
Configuring crossover settings for two-way and three-way systems.
Details on what the warranty covers and its limitations.
Procedures and requirements for getting warranty repairs.