21-EN
Setting the Auxiliary Data Field Display
The XM Auxiliary Data Field (ADF) display can be switched on or
off. There is no ADF function for the SIRIUS receiver.
1
Press MENU to select the SETUP mode.
2
Select “XMADF” by pressing g or f.
3
Select ON/OFF by turning the Rotary encoder.
When setting to ON, Auxiliary Data Field is displayed by
pressing TITLE. (Refer to the “Changing the Display”
section page 20.)
4
Press MENU to select RETURN.
The unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
To Next Page
Loading...
