Alpine CDA-9885 - System Setup and Customization; Bluetooth and General Settings; Clock Display and Playback Modes

17-EN
01GB05CDA9885.fm
ALPINE CDA-9885 68-08564Z14-A (EN)
Displaying Time
Press TITLE repeatedly until the time is displayed.
Each press changes the display.
For details, see “Displaying the Text” (page 15).
• Selecting any tuner or CD function while in the clock priority mode
will interrupt the time display momentarily. The function selected
will be displayed for about 5 seconds before the time returns to the
display.
Blackout Mode On and Off
When Blackout mode is turned on (except Radio Mode) all display
indications on this unit will turn off to reduce power consumption.
This additional power enhances the sound quality.
Press and hold TITLE for at least 2 seconds to activate
the blackout mode.
All display indications on this unit will turn off.
The “B.OUT” indicator lights up.
• If any button on the unit is pressed during the blackout mode, the
function will be displayed for 5 seconds to show the operation before
returning to Blackout mode.
To cancel Blackout mode, press and hold TITLE for at least 2
seconds.
01GB00CDA9885.book Page 17 Friday, November 17, 2006 7:31 PM