EasyManua.ls Logo

Alpine CDA-9887 - Specifications

Alpine CDA-9887
51 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OFF AIR
(XM
mode)
Specifications
The channel currently selected has stopped broadcasting.
- Select another channel.
1------------1
The user has selected a channel number that does not exist or is
not subscribed to.
- The unit will revert back to the previously selected channel.
There is no artist name/feature, song/program title, or additional
information associated with the channel at that time.
- No action needed.
IACQUIRING SIGNAL I
(SIRIUS mode)
FM
TUNER SECTION
Tuning Range
Mono Usable Sensitivity
50
dB
Quieting Sensitivity
Alternate Channel Selectivity
Signal-to-Noise Ratio
Stereo Separation
Capture Ratio
AM TUNER SECTION
Tuning Range
Sensitivity (lEC Standard)
CD PLAYER SECTION
87.7-107.9 MHz
9.3 dBf
(O.~
JlV/75
ohms)
13.5 dBf (1.3 JlV/75 ohms)
80
dB
65
dB
35
dB
2.0
dB
530-1,710 kHz
22.5 JlV/27
dB
Error
If
an error or other problem occurs.
- Change channels or consult your Alpine dealer.
NoiPod
The iPod is not connected.
- Make sure the iPod is correctly connected (refer to
"Connections").
Make sure the cable is not bent excessively.
NO SONG
There are no songs in the iPod.
- Download songs to the iPod and connect to this unit.
Frequency Response
Wow
& Flutter
(%
WRMS)
Total Harmonic Distortion
Dynamic Range
Signal-to-Noise Ratio
Channel Separation
PICKUP
Wave length
Laser power
REMOTE CONTROL
Battery Type
Width
Height
Depth
Weight
GENERAL
5-20,000 Hz
(±1
dB)
Below measurable limits
0.008% (at 1 kHz)
95
dB
(at 1 kHz)
105
dB
85
dB
(at 1 kHz)
795 nm
CLASS I
AAA batteries (2 pcs.)
42 mm (1-21/32")
121
mm (4-25/32")
23
mm (29/32")
50 g (1.8 oz)
INO PODCAST I
There is no podcast data in the iPod.
- Download podcast data to the iPod and connect to this unit.
Error
01
Communication error
- Turn the ignition key off, and then set to ON again.
- Check the display by reconnecting between the iPod and this
unit, using the iPod cable.
Power Requirement 14.4 V DC
(11-16 V allowable)
Power Output
18
W RMS x 4*
*Primary amplifier ratings per CEA-2006 Standard
Power output: measured at 4 Ohms and
~
1% THD+N
SIN: 80 dBA (reference: 1 W into 4 Ohms)
Maximum Pre-Output Voltage 4 V
/1
0 k ohms
Bass +14/-14
dB
at 100 Hz
Treble ±14
dB
at
10
kHz
Weight
1.5
kg
(3
lbs. 4 oz)
CHASSIS SIZE
Error 02
Caused by the iPod Software Version not being compatible with
this unit.
- Update the iPod Software Version to be compatible with this
unit.
Width
Height
Depth
NOSEPIECE SIZE
Width
Height
Depth
178 mm (7")
50 mm (2")
160 mm (6-1/4")
170 mm (6-3/4")
46 mm (1-13/16")
24 mm (15/16")
Due to continuous product improvement, specifications and design
are subject to change without notice.
37-EN

Table of Contents

Related product manuals