CD
Antenna Receptacle
® Power Antenna Lead (Blue)
Connect this lead to the +B terminal of your power antenna,
if
applicable.
• This lead should be used only
for
controlling the vehicle's
power
antenna. Do not use this lead to turn on an amplifier,
or
a signal
processor, etc.
® Remote Turn-On Lead (BluelWhite)
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
@ Audio Interrupt
In
Lead (Pink/Black)
Connect this lead to the Audio interface output of a cellular
phone which provides ground shorting when a call
is
received.
® Illumination Lead (Orange)
This lead may be connected to the vehicle's instrument
cluster illumination lead. This will allow the backlighting of
the CDA-9887to dim whenever the vehicle's lights are
turned
on.
® Switched Power Lead (Ignition) (Red)
Connect this lead to
an
open terminal
on
the vehicle's fuse
box or another unused power source which provides (+)12V
only when the ignition
is
turned
on
or
in
the accessory
position.
(j) Battery Lead (Yellow)
Connect this lead to the positive (+) post of the vehicle's
battery.
@ Fuse Holder (10A)
® Ground Lead (Black)
Connect this lead to a good chassis ground
on
the vehicle.
Make sure the connection
is
made to bare metal and
is
securely fastened using the sheet metal screw provided.
@)
Power Supply Connector
@ Right Front (+) Speaker Output Lead (Gray)
@ Right Front
(-)
Speaker Output Lead (Gray/Black)
@ Right Rear
(-)
Speaker Output Lead (Violet/Black)
@ Right Rear (+) Speaker Output Lead (Violet)
@ Left Rear (+) Speaker Output Lead (Green)
@ Left Rear
(-)
Speaker Output Lead (Green/Black)
@ Left Front
(-)
Speaker Output Lead (White/Black)
@ Left Front (+) Speaker Output Lead (White)
@)
Ai-NET Connector
Connect this to the output or input connector of another
device (CD Changer, Equalizer,
HD
Radio™
TUNER
MODULE, etc.) equipped with
Ai-NET.
• Interface adapter
for
iPoJi9 (KCA-420i) is not recommendedfor use
with this product.
•
You
can input TV/video sound by connecting an optional
Ai-NET/
RCA Interface cable (KCA-121B) to this component.
® Steering Remote Control Interface Connector
To
steering Remote control interface box.
@ Rear Output RCA Connectors
RED
is
right and WHITE
is
left.
@ Front Output RCA Connectors
RED
is
right and WHITE
is
left.
@ Subwoofer RCA Connectors
RED
is
right and WHITE
is
left.
@ Ai-NET Cable (Included with CD Changer)
@ RCA Extension Cable (sold separately)
@ iPod Direct Connector
Control iPod signals.
Connect this to
an
iPod or to
an
optional Bluetooth Box.
To
use a hands-free mobile phone,
an
optional Bluetooth Box
connection
is
required.
For
details
on
connection, refer
to
the Owner's Manual of the Bluetooth Box.
® FULL
SPEEDTM
Connection Cable (KCE-422i)
(sold separately)
@ Setting the 2.2ch (3WAY) /4.2ch (F/R Sub-W) Switch
Set the 2.2ch
(3WAY)
14.2ch
(FIR
Sub-W) switch according
to your audio system.
@)
System Switch
When connecting a processor or divider using
Ai-NET,
place this switch
in
the EQ/DIV position. When no device
is
connected, leave the switch
in
the NORM position.
• Be sure to
tum
the
power
off
to the unit before changing the switch
position.
41-EN
To Next Page
Loading...
