31-EN
Installation
Caution concerning the installation location
1
Before installing, check to make sure that the taking
out and inserting of the disc will not interfere with
operation of the gear shift.
2
Angle of installation
Install at an angle of between horizontal and 35˚. Note that
installing at an angle outside of this range will result in a
loss of performance and possibly damage.
Installation
Secure the ground lead of the unit to a clean metal spot using a screw
(*) already attached to the car's chassis.
Attach the Original Mounting Bracket to each side of the CDA-
W560E, using the screws supplied with CDA-W560E.
Chassis
*
0 – 35˚
CD
Cassette tape
Screws (M5×8)
(Included)
Ground Lead
Mounting Bracket
To Next Page
Loading...
