Alpine CDE-173BT Software Update

3
Head Unit Setup Buttons Illustration
The illustration shows the buttons that will be used during the
update procedure. This illustration is based on the
CDE-174BT model. The button locations will be different on
some models. Please refer to the owner’s manual for your
specific model.
1. Format the USB stick
WARNING – Do not update the Bluetooth firmware while driving
1. Plug in the USB stick.
2. Right click the USB drive
and select “Format…”

Alpine CDE-173BT Specifications

General

MP3 playback	Yes
Audio formats supported	AAC, MP3, WMA
FM band range	87.5 - 108 MHz
LW band range	153 - 281 kHz
Supported radio bands	FM, LW, MW
Preset stations quantity	20
RDS features	AF, EON, PTY, TA, TP
Product color	Black, Green, Red
Volume control	Rotary
CD changer capacity	1 discs
Disc types supported	CD, CD-R, CD-RW
Audio output channels	4.0 channels
Equalizer bands quantity	3
Signal-to-Noise Ratio (SNR)	65 dB
Display type	LCD
USB version	2.0
Bluetooth version	3.0+HS
Bluetooth profiles	A2DP, AVRCP, HFP, HSP
USB ports quantity	1
Headphone connectivity	3.5mm
Key illumination color	Multi

Weight and Dimensions

Weight	1500 g
Dimensions (WxDxH)	170 x 25 x 46 mm