Need help?Do you have a question about the Alpine CDE-180R and is the answer not in the manual?
General| MP3 playback | Yes |
|---|---|
| Audio formats supported | AAC, MP3, WMA |
| FM band range | 87.5 - 108 MHz |
| LW band range | 531 - 1602 kHz |
| Supported radio bands | FM, LW, MW |
| Preset stations quantity | 30 |
| DIN size | 1 DIN |
| RDS features | AF, EON, PTY, TA, TP |
| Product color | Black |
| Frequency range | 5 - 20000 Hz |
| Audio output channels | 4.0 channels |
| Maximum power per channel | 50 W |
| Signal-to-Noise Ratio (SNR) | 105 dB |
| Display type | LCD |
| Number of OSD languages | 7 |
| On Screen Display (OSD) languages | DEU, DUT, ENG, ESP, FRE, ITA, RUS |
| Bluetooth | No |
Weight and Dimensions| Weight | 1240 g |
|---|---|
| Dimensions (WxDxH) | 178 x 161.5 x 50 mm |
Explains general warning and caution symbols used to prevent injuries and damage.
Details specific repair hazards like laser, wiring, temperature, power, and soldering.
Highlights precautions for fuse usage and battery handling during repairs.
Emphasizes using designated parts and ensuring correct wiring practices.
Recommends wearing gloves to prevent electrical shocks or injury.
Visual guide illustrating the steps involved in packing the product.
Instructions to always connect the extension cable during voltage and repair checks.
Illustrates the primary integrated circuits and their connections in the system.
Details frequency range, sensitivity, S/N ratio, and distortion for FM reception.
Details frequency range, sensitivity, S/N ratio, and distortion for MW reception.
Details frequency range, sensitivity, S/N ratio, and distortion for LW reception.
Covers channel balance, distortion, and frequency response for CD playback.
Specifies parameters for USB audio, including channel balance and distortion.
Lists test disc requirements and laser current specifications for the CD mechanism.
Provides details on laser wavelength and power classification.
Outlines power supply, output, dimensions, and weight of the unit.
Defines standards for confirming CD-DA playback without skips or interpolation noise.
Specifies test conditions for evaluating CD-R disc playability with various disc types.
Specifies test conditions for evaluating CD-RW disc playability with various disc types.
To Next Page
