Alpine CDE-195BT - System Setup Menu; General Settings; Display, Tuner, iPod, App, and Bluetooth Settings

28-EN
 CDE-W296BT
 CDE-195BT
Setting
You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, GENERAL Setting, DISPLAY Setting,
etc., can be modified.
1 Press and hold YSETUP for at least 2 seconds to
activate the SETUP mode.
2 Turn the Rotary encoder to select the desired item, and
then press ENTER.
AUDIO
*1
 GENERAL  DISPLAY  TUNER  IPOD  APP 
BLUETOOTH
*2
 AUDIO
(e.g. Select GENERAL)
GENERAL:
CLOCK MODE AUTO CLOCK  CLOCK ADJ
*3
 PWR CLOCK
 MENU LANG  AUX SETUP  AUX NAME
*4
 PLAY MODE
 STAY ON  DEMO MODE  STEERING  CLOCK MODE
DISPLAY:
ILLUMINATI  DIMMER  TEXTSCROLL  SCROLLTYPE 
ILLUMINATI
TUNER:
AF
*5
 REGIONAL
*6
 PI SEEK
*7
 FM SET  AF
IPOD:
IPOD LIST
APP:
ALPINE APP  TTS VOLUME  ALPINE APP
*1 Refer to “Sound Setting” on page 18.
*2 Refer to “Bluetooth SETUP” on page 33.
*3 Refer to “Setting Time” on page 10.
*4 Displayed only when AUX SETUP is set to ON.
*5 Refer to “Turning AF (Alternative Frequencies) ON/OFF” on
page 12.
*6 Refer to “Receiving RDS Regional (Local) Stations” on page 13.
*7 Refer to “PI SEEK Setting” on page 13.
3 Select an Item with the Rotary encoder, and then press
ENTER.
(e.g. Select AUX SETUP)
4 Turn the Rotary encoder to change the setting, and then
press ENTER.
(e.g. Select ON or OFF)
5 Press and hold YSETUP for at least 2 seconds to return
to normal mode.
Notes
•Press t to return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
GENERAL is selected on the setup main menu in step 2.
Setting the Clock Display (CLOCK MODE)
You can select the clock display type, 12-hour or 24-hour, depending on
your preference.
 Setting item: CLOCK MODE
Setting contents:
24H (Initial setting) / 12H
Setting the Time to automatically be adjusted
When ON is selected, the clock is adjusted automatically based on the
time data sent from the RDS broadcast.
 Setting item: AUTO CLOCK
Setting contents:
OFF / ON (Initial setting)
OFF:
To adjust it manually.
ON:
Adjust the clock automatically based on the time data.
Turning the Clock Display ON/OFF
 Setting item: PWR CLOCK
Setting contents:
OFF / ON (Initial setting)
OFF:
Clock of the PowerOff does not display.
ON:
Clock of the PowerOff displays.
SETUP
Use steps 1 to 5 to select one of the SETUP modes to modify.
See the applicable section below for details about the
selected SETUP item.
/SOURCE


/SETUP
/ENTER

DIM.
6
Rotary encoder
/SOURCE

/SETUP
/ENTER
DIM.


6
Rotary encoder
General Setting