Alpine CDE-203BT - Mounting the Unit in the Dashboard

37-EN
EN
DE
FR
ES
IT
SE
NL
RU
PL
ALPINE CDE-201R 68-40368Z03-C (EN) 128x182
and the
rotection
nit.
on collar
they
, then
Mounting the unit in the dashboard
Before installing, make sure the catches on both
sides of the bracket
are bent inwards 2 mm
(/ in).
1 Position the bracket inside the
dashboard, then bend the claws outward
for a tight fit.
53 mm (2 / in)
Catch
182 mm (7 / in)
2 Mount the unit onto the bracket , then
attach the protection collar
.
Notes
• If the catches are straight or bent outwards, the unit will
not be installed securely and may spring out.
• Make sure the 4 catches on the protection collar
are
properly engaged in the slots of the unit.
Detaching and attaching the front
panel
For details, see “Detaching the Front Panel”
(page9).
Resetting the unit
For details, see “Resetting the Unit” (page9).