5-EN
EN
DE
FR
ES
IT
SE
NL
RU
PL
ALPINE CDE-201R 68-40368Z03-C (EN) 128x182
R
nside
V
tion may
ury.
OTS OR
or
s may
CABLE
MINAL.
hock or
ABLES.
ply
will
f the
WHEN
to
el lines,
e such
BRAKE
OUND
ring
stem), or
ations or
could
e fire etc.
DO NOT INSTALL IN LOCATIONS WHICH
MIGHT HINDER VEHICLE OPERATION, SUCH
AS THE STEERING WHEEL OR SHIFT LEVER.
Doing so may obstruct forward vision or
hamper movement etc. and results in serious
accident.
CAUTION
This symbol means important instructions.
Failure to heed them can result in injury or
material property damage.
HALT USE IMMEDIATELY IF A PROBLEM
APPEARS.
Failure to do so may cause personal injury or
damage to the product. Return it to your
authorized Alpine dealer or the nearest Alpine
Service Centre for repairing.
HAVE THE WIRING AND INSTALLATION
DONE BY EXPERTS.
The wiring and installation of this unit requires
special technical skill and experience. To ensure
safety, always contact the dealer where you
purchased this product to have the work done.
USE SPECIFIED ACCESSORY PARTS AND
INSTALL THEM SECURELY.
Be sure to use only the specified accessory
parts. Use of other than designated parts may
damage this unit internally or may not securely
install the unit in place. This may cause parts to
become loose resulting in hazards or product
failure.
ARRANGE THE WIRING SO IT IS NOT
CRIMPED OR PINCHED BY A SHARP METAL
EDGE.
Route the cables and wiring away from moving
parts (like the seat rails) or sharp or pointed
edges. This will prevent crimping and damage
to the wiring. If wiring passes through a hole in
metal, use a rubber grommet to prevent the
wire’s insulation from being cut by the metal
edge of the hole.
DO NOT INSTALL IN LOCATIONS WITH HIGH
MOISTURE OR DUST.
Avoid installing the unit in locations with high
incidence of moisture or dust. Moisture or dust
that penetrates into this unit may result in
product failure.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
