23-EN
The display in MP3/WMA/AAC mode:
The display in BLUETOOTH Audio mode:
*1 When an HD Radio signal is received, text information such as
Radio Station, Artist, etc., is displayed.
If there is no text information, nothing will be displayed.
*2 Displayed during playback of a disc with CD Text.
If there is no text information, nothing will be displayed.
*3 The root folder of disc/Flash Memory is displayed as “\ROOT”.
If there is no text information, nothing will be displayed.
*4 If an MP3/WMA/AAC file contains ID3 tag/WMA tag
information, the ID3 tag/WMA tag information is displayed
(e.g., song name, artist name, and album name). All other tag
data is ignored.
If there is no text information, nothing will be displayed.
*5 When the Text Scroll (refer to “Scroll Setting (Text Scroll)” on
page 27) is set to “Auto”, the display cannot be switched by
pressing k VIEW. The display contents switch alternately.
When displaying Text, the following indicators are lit according to the
mode.
Text compatible CDs contain text information such as the disc name and
track name. Such text information is referred to as “text”.
Notes
• Some characters may not be displayed correctly with this device,
depending on the character type.
• If there is no TEXT information, the display is blank.
• The text or tag information may not be correctly displayed, depending
on the contents.
Option Menu Setting
You can quickly adjust the setting items relevant to the current SOURCE
by using Option Menu.
1
Press and hold ENTER/OPTION for at least 2 seconds
to activate the Option menu of the current source.
Note
• The option menu varies depending on the source.
2
Turn the Rotary encoder to select the desired setting
item, and then press ENTER.
To Next Page
Loading...
