Alpine CDM-7874RB - Page 2

<Cautions for Safe Repair Work>
The
following
cautions
will
prevent
accidents
in
the
workplace
and
will
ensure
safe
products.
@The
symbols
indicate
caution
is
needed
to
prevent
injuries
and
damage
to
property.
The symbols and their meanings follow.
Ww
:
If
you
ignore
this
symbol
and
handle
the
product
incorrectly
or
unsafely,
arming
serious
injury
or
death
may
result.
Cauti
on
If
you
ignore
this
symbol
and
handle
the
product
incorrectly
or
unsafely,
injury
or
only
material
damage
may
result.
@
The
following
symbols
indicate
two
levels
of
cautions.
coming from the pickup.
loose you sight.
Do
not
look
squarely
into
the
laser
light
Fuse
Caution
VAN
@
Always
use
a
designated
fuse.
You
ma’
Use
of
an
incorrect
fuse
may
result
in
a
fire.
Battery Caution
Use the designated battery.
Confirm the correct polarity and seat of the battery.
An incorrect battery or an improperly connected or
seated battery may result in a fire.
Do not allow wiring to be caught in the
screw/chassis.
If wiring is caught in the screw/chassis, it may cause
a short circuit, resulting in a fire.
Designated Parts Caution
QO Look up the part list and ensure that only designated
High Temperature Caution
Touching the heat sink may cause severe burns.
parts are used to prevent problems or accidents.
Wiring Caution
Ensure that the wiring is correct when rewiring to
prevent problems with ignition/breakdown.
Reverse Power Supply Connections or
AN
VAIS
AN
Reverse power supply connections or misconnections
ignition problems and smoke may result.
Wear Gloves
Wear gloves to prevent electrical shocks or injury
Soldering Caution
Hot solder from solder splash may cause severe
burns.
from
the
end
face
of
the
metal.