To Next PageTo Next Page
Need help?Do you have a question about the Alpine CDM-9801 and is the answer not in the manual?
General| Brand | Alpine |
|---|---|
| Model | CDM-9801 |
| Category | Car Receiver |
| Language | English |
Crucial safety instructions that could lead to serious injury or death if ignored.
Important safety instructions that could lead to injury or material property damage if ignored.
Safety instructions regarding temperature, moisture, disc handling, and maintenance.
Procedure for initializing the unit after installation or power application.
Instructions for powering the unit on and off using the SOURCE/POWER button.
Steps to enable or disable the subwoofer output for audio settings.
Guide to adjusting volume, balance between left/right, and fader between front/rear.
Enables low- and high-frequency emphasis at low listening levels for improved sound.
Instantly lowers the audio volume level by 20 dB with a single button press.
Corrects phase distortion for improved sound reproduction and clarity.
Connects external audio sources like TV/video sound via optional cables.
Cycle through display modes to show the current clock time.
Procedure to adjust the hours and minutes for the unit's clock display.
Adjusts bass frequency emphasis, center frequency, and band width for tonal preference.
Adjusts treble frequency emphasis and level for personalized sound tuning.
Selects from three different bass type settings to match speaker systems.
Automatically searches for and tunes to radio stations based on signal strength.
Tune to specific radio stations by manually adjusting the frequency step by step.
Save favorite radio stations to preset buttons for quick access.
Automatically scans and stores the 6 strongest stations in the selected band.
Select and play stored radio stations directly from preset memory buttons.
Instructions for loading and removing CDs from the player's slot.
How to start CD playback and temporarily pause it during operation.
Navigate to the beginning of the current or next track.
Quickly move forward or backward within a track to find a specific section.
Set the player to continuously repeat the current track or all tracks.
Play tracks from the disc in a random sequence for varied listening.
Plays the first 10 seconds of each track sequentially for previewing.
Operate an optional Alpine CD changer via the main unit's controls.
Troubleshooting guide for common issues with the unit's basic functions, radio, and CD player.
Detailed steps and considerations for physically installing the unit into a vehicle.
Wiring diagrams and explanations for connecting power, speakers, antenna, and accessories.
