EasyManua.ls Logo

Alpine CHM-S665RF - Specifications

Alpine CHM-S665RF
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English EspañolFrançais
34
Specifications
English
CD CHANGER SECTION
Sampling Rate ...........................................................................44.1 kHz
System ................................................... Optical (Compact Disc System)
Number of Quantization Bits ................................................ 16-bit Linear
Oversampling .............................................................................. 8 Times
Number of Channels ................................................................ 2 (stereo)
Frequency Response .................................. 5 – 20,000 Hz (+0, –0.5 dB)
Wow & Flutter ................................................... Below measurable limits
Total Harmonic Distortion ........................................... 0.004% (at 1 kHz)
Dynamic Range ............................................................................. 94 dB
Signal-to-Noise Ratio ................................................................. 103 dBA
Channel Separation ......................................More than 85 dB (at 1 kHz)
Pickup
Wave Length ............................................................................ 795nm
Laser Power .......................................................................... CLASS I
Power Requirement ............................... 14.4V DC (11 – 16V allowable)
Output Voltage ...................................................... 850mV into 10k ohms
Weight ...................................................................... 1.7 kg (3 lbs. 11 oz)
Dimensions (W x D x H) .............................. 255mm x 163.3mm x 63mm
(10" x 6-7/16" x 2-1/2")
REMOTE DISPLAY UNIT/MODULATOR/WIRELESS REMOTE
CONTROL UNIT SECTION
RF Output Frequency (Selectable) ............................... 87.7 – 89.9 MHz
RF Output Voltage ..................................................................... 70 dBµV
RF Modulator Input Sensitivity/Impedance ................ 500 mV/10k Ohms
Weight
Remote Display Unit ....................................................0.18 kg (6 oz)
Wireless Remote Control Unit .................................. 0.02 kg (0.7 oz)
FM Modulator Unit ....................................................... 0.4 kg (14 oz)
Chassis Dimensions (W x H x D)
Remote Display Unit ............................... 113mm x 39.5mm x 19mm
(4-7/16" x 1-9/16" x 25/32")
Wireless Remote Control Unit ....................... 40mm x 6mm x 90mm
(1-9/16" x 1/4" x 3-1/2")
FM Modulator Unit ..................................... 130mm x 35mm x 74mm
(5-1/8" x 1-3/8" x 2-15/16")
Note: Due to continuous product improvement, specifications and
design are subject to change without notice.

Table of Contents

Related product manuals