Installation instructions for
INE-W920R / INE-W925R / INE-W928R and INE-W977BT:
1) Power the unit on. Select Navigation function and operate the unit until the display shows the map
screen.
2) INE-W920R / INE-W925R:
Insert the Micro SD card into the card slot below the detachable face
plate.
INE-W928R / INE-W977BT: Insert the Micro SD card adapter including the Micro SD card into the
SD card slot located below the display.
3) A small software program will start automatically in the background, which takes less than one
minute. Wait until the map screen is shown on the display.
Caution: Do not power off the unit and do not switch off ACC.
4) Please note: The SD card has to remain inside the unit.
How to adjust truck specific settings in the Navigation Software:
1) Press hard key “Navigation” and touch the “Settings” symbol from the Navigation Main Menu.
(Example: INE-W920R)
2) Touch “Route Settings”, and then touch “Vehicle”.
3) Scroll down and select “Default Lorry”.
To Next Page
Loading...
