Alpine SBV-10-WRA User Manual

Jeep
UNLIMITED
 1/6
Jeep Wrangler
SBV-10-WRA
Pre-loaded 10" Subwoofer System
Installation Manual
Model: 4-Door Wrangler Unlimited
Year: 2007-2018 JKU
Introduction
Congratulations on purchasing the SBV-10-WRA. This installation manual is designed to take you through the
step-by-step installation of the SBV-10-WRA into a 2007 - 2018 Jeep Wrangler Unlimited. Please familiarize
yourself with the owners manual and if you still have additional questions please call 1-800-TECH-101.
Note
Design and specifications are subject to change without notice for improvement.
To Ensure Safe Use, Always Follow These Precautions
The installation of this product requires specialized skills and experience. We recommend that you have the
product installed by an Alpine authorized dealer.
Before you use this product, be sure to carefully read this installation manual and the separate user's manual
so that you can use the product correctly. Alpine Electronics bears no responsibility for problems that arise as
a result of failure to follow the instructions in the manuals.
This manual includes a number of symbols that are intended to help you use the product safely, to prevent
harm to you and others, and to protect against damage to property. These symbols and their meanings are
listed below. Make sure you fully understand these symbols before you begin reading the main text.
Explanations of Injury and Damage That May Result from Incorrect Use
Warning
Ignoring the content marked by this indication and using the product incorrectly may
lead to death or serious injury.
Caution
Ignoring the content marked by this indication and using the product incorrectly may
lead to injury or property damage.
* The specified vehicles have been tested and have met compatibility specs at the time of testing. Compatibility is
not guaranteed if the manufacturer has made production changes to the listed vehicles above.
Disconnect the battery before beginning the installation.
Failure to do so can lead to electric shock, injury or damage to equipment.
Mandatory

Alpine SBV-10-WRA Specifications

General

Size	10 inches
Power Handling (RMS)	300 Watts
Power Handling (Peak)	900 Watts
Impedance	2 Ohms
Enclosure Type	Sealed
Compatibility	Jeep Wrangler (2011-2018)
Wiring Harness	Included
Frequency Response	20 Hz - 200 Hz

Summary

Product Information and Introduction

Introduction to the Installation

Welcome and overview of the installation manual for the SBV-10-WRA.

Critical Safety Warning

Mandatory Battery Disconnection

Essential step to disconnect the battery before installation to prevent electrical hazards.

Safety Precautions and Symbols

Understanding Safety Symbols and Precautions

Explains safety symbols and provides general precautions for safe usage.

Key Safety Warnings and Cautions

Highlights critical warnings and cautions regarding product handling and installation risks.

Installation Requirements

Required Tools for Installation

Lists the specific tools needed for the installation process.

Included Accessories

Lists the components provided with the subwoofer system.

Passenger Seat Removal

Steps for Passenger Seat Removal

Detailed instructions for removing the passenger seat from the vehicle.

Disconnecting Seat Components

Guidance on disconnecting electrical connectors and mounting plates.

Enclosure Installation

Installing the Subwoofer Enclosure

Procedure for placing and securing the subwoofer enclosure.

Reassembly and Final Connections

Instructions for reinstalling the seat and reconnecting terminals.

Product Specifications

Technical Specifications of the Subwoofer

Detailed technical data including impedance, power handling, and dimensions.

Important Performance Information

Guidelines for Optimal Performance

Advice to maximize listening satisfaction and prevent equipment damage.

Limited Warranty

Alpine Limited Warranty Terms

Details the warranty coverage, duration, and conditions for the product.

Warranty Service and Contact Information

How to obtain service and contact Alpine for support.