To Next PageTo Next Page
Need help?Do you have a question about the Alpine CDA-7844 and is the answer not in the manual?
General| Power Output (RMS) | 18W x 4 |
|---|---|
| CD Playback | Yes |
| CD-R/RW Playback | Yes |
| MP3 Playback | No |
| WMA Playback | No |
| Tuner | AM/FM |
| Preamp Outputs | 3 (Front, Rear, Subwoofer) |
| Preamp Voltage | 4V |
| Display Type | LCD |
| Bluetooth | No |
| CD Text | Yes |
| Remote Control | Yes |
| Detachable Face | Yes |
| Maximum Power | 45W x 4 |
| Equalizer | 3-Band |
Please read this manual for optimal enjoyment and future reference.
Important instructions; failure to heed may cause severe injury, death, or electric shock.
Keep small articles from children; use correct fuse rating to prevent fire/shock.
Halt use if problem appears; avoid operation while driving; maintain safe volume levels.
Use for stated purposes; handle batteries correctly; avoid mixing old/new batteries.
Avoid adverse environmental conditions; handle detachable panel with care.
Operate within temperature range; allow for condensation; do not play damaged discs; do not self-repair.
Do not grip disc during reload; do not insert disc with power off; insert one disc label-up.
Handle new discs carefully; check for bumps; use only round discs.
Avoid locations with adverse environmental conditions; handle detachable panel with care.
Turn off power, press release button, pull panel out.
Insert right side, align holes, push left side to lock; ensure connectors are clean.
Remove panel, press reset button to initialize the unit.
Press PWR button to turn unit on/off; volume adjusts gradually.
Press Eject button for 3 secs to toggle Subwoofer ON/OFF; initial mode is OFF.
Press MODE to select mode; rotate knob to adjust settings.
Press INTLZ, then UP to select BC; use TUNE for frequency; press INTLZ to confirm.
Provides audible feedback for button presses; toggle ON/OFF using TUNE.
Press INTLZ, then UP to select AMBER; use TUNE to toggle color; press INTLZ to set.
Set DIM to AUTO or Manual; use TUNE to toggle; press INTLZ to activate.
Press MUTE to lower volume by 20 dB; press again to restore.
Press and hold MODE to turn BBE ON/OFF; press MODE to adjust level.
Activate/deactivate Mute mode using TUNE button; initial setting is ON.
Activates demo mode for connected Ai-NET units; press DEMO button to start/stop.
Press DISP to show clock time; press again to show other functions.
Press and hold DISP, use MODE to adjust hours/minutes; time sets automatically.
Press SOURCE, BAND, then TUNE to select frequency; use DN/UP for fine-tuning.
Press SOURCE, BAND, TUNE to scan; use DN/UP to seek; DX/SEEK indicators.
Select band, tune station, press/hold preset button (1-6) to store.
Press SOURCE, BAND, hold A.ME; unit scans and stores 6 strong stations.
Manually preset up to 6 stations from any band into D.A.P. band.
Press SOURCE, BAND, then D.A.P. button; press preset button to select station.
Automatically searches for receivable stations in a region and stores them.
Toggle between Mono and Stereo FM reception using F/MONO buttons.
Set RDS mode and tune to RDS stations using SOURCE, BAND, DN/UP buttons.
Activate T.INFO mode; select station; TP indicator lights up.
Handling of weak signals, skipping messages, volume memorization, SEEK selects TP stations.
Press F, then PTY to activate; select desired program type using DN/UP.
Press PTY to search for stations of selected type; shows "NO PTY" if none found.
Unit switches to FM for traffic info during CD play; returns to source after.
Indicator blinks for weak signals; unit selects new station if TP signal lost.
Tune to station with text, press F, then R.TEXT to display messages.
Press F to return to normal mode; shows "NO TEXT" if no message received.
Select PTY31 using INTLZ/UP; use TUNE to toggle ON/OFF; shows "ALERT" for broadcasts.
Insert CD label-up; player auto-draws; press eject button; check for auto-retraction.
Insert CD for playback; display shows track #/time; press/II to pause/play.
Use DN to return to track start, UP to advance; fast forward/backward by holding DN/UP.
Press RPT to repeat track; RPT indicator appears; press RPT again to turn OFF.
Press M.I.X. to play tracks randomly; ALL M.I.X. includes tracks from all CDs in magazine.
Notes on using "F" button with 6/12-disc CD Shuttles for M.I.X. or ALL M.I.X. modes.
Press SCAN to play first 10 secs of tracks; press SCAN again to stop.
Press TITLE button to toggle between Normal, Clock, and CD Title display modes.
Press and hold TITLE, use MODE to select characters, press MODE to store each character.
Use TITLE to select mode, SOURCE to scan/erase; press TITLE to cancel.
Connect 6/12-disc Shuttle via Ai-NET; use KCA-400C for multiple changers.
Press SOURCE for CHANGER mode; press BAND to select shuttle; use Disc Select buttons.
Notes on selecting discs, FUNC indicator status, and 12-disc shuttle operation.
Search for CDs by title; press and hold TSM to scan; use DN/UP to select; press TSM to play.
Supports up to 6 shuttles; requires KCA-400C for 2+ changers; use SOURCE/BAND to select.
Mode active for 3 secs; press BAND until desired shuttle indicator appears.
Explains buttons like Mute, Power, Play/Pause, CD Changer, Band, Volume.
Details buttons ▲, SEEK (DN/UP) for radio/CD modes.
Instructions for replacing remote control batteries (AAA type).
Handle discs carefully, avoid fingerprints, do not affix labels, do not write on disc.
Clean discs with soft cloth; use mild detergent for heavy soiling.
Recommends against using aftermarket accessories that may affect performance.
Checklist for common problems like no function/display, improper connections, blown fuse, micro-computer malfunction.
Check antenna connection and grounding; replace if necessary.
Check signal area, DX mode, antenna grounding, length, and extension.
Check antenna length/grounding; check operating temperature; allow for condensation.
Check for CD insertion problems or damaged discs; eject damaged discs.
Address skips due to vibration/dirt/scratches; use adapter for 8cm discs.
High temp protection; shuttle malfunction; consult dealer; check/reinsert magazine.
Address magazine ejection failures; no magazine or no indicated disc errors.
Details tuner ranges, CD performance, remote battery type, and general unit dimensions.
Covers power, output, voltage, audio controls, weight, and chassis dimensions.
