Alpine Eco-TWIST PXX1500 User Manual

Alpine Eco-TWIST PXX1500

11 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Table of Contents

Questions and Answers:

C
Chad JonesAug 5, 2025
What to do if my Alpine Eco-TWIST PXX1500 Water Pump has completely shut-off?
- J
  Jason WatsonAug 5, 2025
  If your Alpine Water Pump has completely shut off, it could be due to several reasons. First, the ground-fault circuit interrupter (GFCI) might have tripped. Also, ensure that the water temperature is within the recommended working range. Furthermore, cleaning the pump pre-filter and impeller may resolve the issue. If the problem persists after these steps, the impeller may need replacement.
R
Richard GordonAug 13, 2025
Why is my Alpine Eco-TWIST PXX1500 Water Pump humming but not pushing water?
- E
  Emily BrownAug 13, 2025
  If your Alpine Water Pump hums but doesn’t push water, start by checking the area around the pump to ensure no debris is blocking water from entering. Clean the pump pre-filter and impeller. Verify the pump is receiving the correct voltage. If the issue continues, the impeller may need to be replaced.
V
Victoria BradleyAug 27, 2025
How to fix reduced water flow in my Alpine Eco-TWIST PXX1500 Water Pump?
- P
  pricekimberlyAug 27, 2025
  If your Alpine Water Pump has reduced water flow, begin by checking the area around the pump to ensure no debris is blocking water from entering. Cleaning the pump pre-filter and impeller might be necessary. If the issue persists, the impeller may need to be replaced.
Z
zacharybatesAug 19, 2025
What to do if my Alpine Water Pump turns on and off?

Alpine Eco-TWIST PXX1500 Specifications

General

Brand	Alpine
Model	Eco-TWIST PXX1500
Category	Water Pump
Language	English

Summary

Introduction

Safety Information

Components and Pump Parts

Dismantling and Reassembling

Dismantling

Step-by-step guide for taking apart the pump for maintenance.

Reassemble

Instructions for putting the pump back together after maintenance.

Installation

Typical Installation For Your Pond

Guide to submerging the pump in a pond for optimal circulation and placement.

Starting up Pumps Installed in Water

Procedure for starting the pump when submerged in water.

Starting Pumps with Dry Installation

Procedure for starting the pump when installed outside the water.

Operation and Maintenance

Pump Pre-Filter Cage

Instructions for the pump's pre-filter cage during operation.

Pump Pre-Filter Cleaning

Recommended procedure for cleaning the pump pre-filter cage.

Winter Pump Care

Troubleshooting

Replacement Parts

Related product manuals

Preview: Alpine PAD400

Preview: Alpine Cyclone Pond Pump PAL2100

Alpine Cyclone Pond Pump PAL2100

Alpine Cyclone Pond Pump PAL3100

Alpine Cyclone Pond Pump PAL4000

Alpine Cyclone Pond Pump PAL5200

Alpine Cyclone Pond Pump PAL6550

Alpine Cyclone Pond Pump PAL8000

Cyclone Pond Pump PAL10300