Alpine EZi-DAB-BT - Switching Between Auxiliary Connection and FM Transmission

22
Auto standby
By default, the receiver automatically goes into standby after four hours to save your vehicle’s battery power. To change the auto
standby setting:
1. Press the button.
2. Turn and press the Select dial to choose ‘SETTINGS’ > ‘AUTO STANDBY’.
3. Turn and press the Select dial to choose a standby time between 2 and 8 hours.
Switching between auxiliary connection and FM transmission
To change the way EZi-DAB-BT connects to your existing audio system:
1. Press the button.
2. Turn and press the Select dial to choose ‘SETTINGS’ > ‘AUDIO OUT’.
3. Turn and press the Select dial to choose one of the following options:
FM TRANSMIT: Select this if you want EZi-DAB-BT to connect to your existing audio system using FM transmit. Turn and
press the Select dial again to choose the FM frequency that you want EZi-DAB-BT to use for transmitting to your audio
system.
Note: You may want to change the FM transmit frequency if you find it is interfering or using the same frequency as a
broadcast FM radio station.
LINE OUT: Select this if you want EZi-DAB-BT to connect to your existing audio system using the auxiliary input connection.
Turn and press the Select dial again to choose a ‘GAIN’ setting between ‘NORMAL’ (Default) and ‘LOW’. Choose ‘LOW’ if the
audio sounds distorted . If you still experience problems, try using the ‘FM TRANSMIT’ option.
Note: For best performance, we recommend using the ‘ LINE OUT ’ option.