Receiver overview
Reset button
Used to reset EZi-DAB-BT or to
start pairing between the receiver
and the wireless controller, see
’Troubleshooting’ on page 25 for
more information.
Optional detachable magnetic grounding tail
We recommend fitting the magnetic grounding tail if you
can stick it to a metal part of your vehicle’s bodywork.
It can improve DAB reception in areas with poor signal
strength. See the next page for installation guidance.
Power and audio out cable
Status LED
Lights up for a few seconds when you first switch
on EZi-DAB-BT. If the LED starts to flash see
’Troubleshooting’ on page 25 for more information.
Film antenna
Clip to the receiver.
Microphone connection
To Next Page
Loading...