Alpine HCE-RCAM-WRA - Wiring Diagram: OEM Head Unit With ALP-HRN-CAMCH & KCX-C2600 B (Sold Separately)

Jeep Wrangler
HCE-RCAM-WRA  15/16
Wiring Diagram: OEM Head Unit With ALP-HRN-CAMCH & KCX-C2600B (Sold Separately)
Factory Head Unit
To Rear
Camera Input
KCX-C2600B
(Sold Separately)
Reverse Out (Orange/Black)
Reverse In
(Orange/White)
Accessory (Red)
Battery (Yellow)
Ground (Black)
1 2 3 4 5 6
1 - V. Out
2 - Other Camera
3 - Front Camera
4 - Rear Camera
5 - Switch
6 - Power Wires
Alpine Direct Front Camera
Toggle Switch
NOTE: The HCE-C1100 can NOT be plugged in directly. It must be used with the
Power & Video unit and plugged in with the RCA.
Power & Video
Unit
Camera Extension Cable
HCE-RCAM-WRA
NOTE: It is highly recommended to
use an Alpine direct connect camera
for the front camera. Any other camera
can not be guaranteed to work.
Ground (Black)
Accessory (Red)
To Factory
Camera Connector
NOTE:
The OEM radio will need to be
ashed by a Jeep dealer
to enable the rear camera
feature when using the
ALP-HRN-CAMCH
ALP-HRN-CAMCH