Jeep Wrangler
HCE-RCAM-WRA 8/16
Spare Tire and Wheel Removal
1 Using 19mm socket, extract the lug nuts.
3 Using panel removing tools, unclip and remove wire
cover on the rear gate.
4 Using panel removing tools, unclip and remove vent
cover on the rear gate.
Camera & Light Extension Cable Installation
1 Route the wires:
A. Start from the head unit harness
B. Behind the glove box
C. Down the passenger kick panel
D. Door sill
E. Along the rear right side panel
F. Along the rear door handle cable
A
B
C D
E
To Next Page
Loading...