Alpine i407-WRA-JK - User Manual

Jeep Wrangler
i407-WRA-JK 20210811v1
 1/18
Jeep Wrangler
i407-WRA-JK
Restyle Installation Manual
 Model: Wrangler JK
 Model Year: 2007-2018
Note:
Design and specifications are subject to change without notice for improvement.
To Ensure Safe Use, Always Follow These Precautions
The installation of this product requires specialized skills and experience. We recommend that you have the
product installed by an Alpine authorized dealer.
Before you use this product, be sure to carefully read this installation manual and the separate user's manual
so that you can use the product correctly. Alpine Electronics bears no responsibility for problems that arise as
a result of failure to follow the instructions in the manuals.
This manual includes a number of symbols that are intended to help you use the product safely, to prevent
harm to you and others, and to protect against damage to property. These symbols and their meanings are
listed below. Make sure you fully understand these symbols before you begin reading the main text.
Explanations of Injury and Damage That May Result from Incorrect Use
Warning
Ignoring the content marked by this indication and using the product incorrectly is
expected to lead to death or serious injury.
Caution
Ignoring the content marked by this indication and using the product incorrectly is only
expected to lead to injury or property damage.
Jeep
Model Year
Wrangler JK 2007-2018
* The specified vehicles have been tested and have met compatibility specs at the time of testing. Compatibility is
not guaranteed if the manufacturer has made production changes to the listed vehicles above.
Warning: Before you begin wiring, remove the ground wire from the negative
terminal of the battery. Failing to do so can lead to electric shock, injury or damage
to equipment.
Introduction
Congratulations on purchasing the i407-WRA-JK. This installation manual is designed to take you through the
step-by-step installation of the i407-WRA-JK into a 2007-2018 Jeep Wrangler JK. Please familiarize yourself
with the owners manual and if you still have additional questions please call 1-800-TECH-101.

Summary

Introduction and Safety Precautions

Introduction

Details the congratulatory message and support contact for the installation manual.

Ensuring Safe Use and Precautions

Emphasizes the need for specialized skills and careful reading of manuals for safe installation.

Explanations of Injury and Damage

Defines symbols for 'Warning' (death/serious injury) and 'Caution' (injury/property damage).

Tools and Accessories

Tools Required

Lists and illustrates the necessary tools for the installation process.

Accessory List

Catalog of included components for the Head Unit and iDatalink Maestro.

Installation and Programming Procedures

Programming the iDatalink Maestro Module

Step-by-step guide to program the Maestro module via the Weblink software.

Factory Unit Disassembly

Instructions for removing the factory unit for 2007-2010 Jeep Wrangler models.

Factory Unit Disassembly (2011-2017)

Instructions for removing the factory unit for 2011-2017 Jeep Wrangler models.

Installation Instructions

Guides on connecting the OBDII, mounting components, and installing the head unit.

Advanced Connections and Troubleshooting

Disconnecting Uconnect

Steps for disconnecting the factory Uconnect system for 2011-2017 vehicles.

Connecting SiriusXM Module

Diagram for integrating the SiriusXM antenna connection.

Wiring Diagram

Detailed wiring schematic for the i407-WRA-JK installation.

Wire Harness Pin Outs

Specific pin assignments for various harnesses and connectors.

Setup and Troubleshooting

Set Up Guide

Steps to configure settings like cameras, AUX input, and vehicle information.

Troubleshooting Guide

Common issues with HDMI, iDatalink, audio, and steering wheel controls.

Alpine i407-WRA-JK Specifications