Alpine iLX-F309 - Page 8

6-EN
01GB04iLX-F309-US_EN.fm
ALPINE iLX-F309 68-34732Z91-A (EN)
2 Fix the Display unit to the slider of the main unit using 4
screws (M4×6).
3 Mount the POWER PLATE using a screw (M3×4).
• If you do not attach the POWER PLATE, the display will not turn on.
Make sure to attach the POWER PLATE.
4 Adjust the mounting position of the display.
• The available adjustment positions of the Display differ depending on
the front-back/up-down/angle positions. Consult “Position Adjustment
and Mounting Dimensions of the Display” (page 18) for details.
1) Hold the Display up vertically, remove the 4 flush head
screws (M4×13) on the left and right sides for up-down
adjustment, and adjust the up-down position of the display.
Screw (M4×6) (Included)
POWER PLATE (Included)
Screw (M3×4) (Included)
Flush head screw (M4×13)
(left and right)
ML.book Page 6 Friday, January 19, 2018 9:46 AM