Alpine iLX-F309 - Page 9

7-EN
01GB04iLX-F309-US_EN.fm
ALPINE iLX-F309 68-34732Z91-A (EN)
EN
FR
ES
2) After adjustment, tightly fix the display with the 4 Flush head
screws (M4×13) for up-down adjustment.
3) Adjust the angle of the display.
4) After adjustment, secure the display with the 2 angle
adjustment screws (M4×6) (left and right) that were removed
in Step 1 on page 5.
Flush head screw(M4×13)
(left and right)
0°
-20°
45°
20°
0° -20°
45°20°
2-b
2-a
Re
f
er to t
h
e i
ll
ustration
b
e
l
ow to use t
h
e screw
h
o
l
es
f
or ang
l
e
adjustment.
•Example:
To install the display at the angle of 20°, use the screw holes 2
and b.
2-c
a
b
c
2
1
Angle adjustment screws (M4×6)
(left and right)
ML.book Page 7 Friday, January 19, 2018 9:46 AM