Alpine INE-W940 - External DVD Changer Operation; Operating the Mobile Digital TV Receiver (DVB-T)

58-EN
When the External DVD changer playback screen is displayed, you can
touch the screen to display the operation screen. For details on how to
operate, refer to the Owner’s Manual of the connected DVD changer.
• The DVD-CHG. operation mode screen and the Menu operation
mode screen are the same as the external DVD player operation
screen. Refer to ”Operating an External DVD Player.”
External DVD changer display example 3/3 (Info
mode)
[Disc1]-[Disc6]
Selects a Disc.
Operating the Mobile Digital TV
Receiver (DVB-T)
To operate the Mobile Digital TV Receiver (DVB-T) (Optional), set
“Setting the Primary AUX Name (AUX Setup)” (page 44).
• “DVB-T” is only applicable in Europe/Asia.
1 Press the (AUDIO) button.
2 Touch [DVB-T] of Top banner.
The display shows the DVB-T mode screen.
When you touch the screen in the DVB-T mode, the operation screen is
displayed. For details on how to operate, refer to the Owner’s Manual of
the connected Digital TV Receiver (DVB-T).
Menu operation mode screen display example
[]
Switches the Channel number/ Favorite channel number
down.
[]
Switches the Channel number / Favorite channel number
up.
[TUNE] (Channel or FAV)
Switches between the Channel mode and the Favorite
channel mode.
[EPG]
Call up the Electronic Program Guide (EPG).
[MENU]
Call up the menu screen.
[Menu Control]
Call up the menu operation mode.
[A/V]
Switches the source.
[SCAN]
Touch the switch to start the scan procedure.
About the DVD Changer Operation Screen
Changing to the Mobile Digital TV Receiver
(DVB-T) Mode
Touch [<<], [>>]
About the DVB-T Operation Screen