Alpine INE-W960E - Saving a Location as an Alert Point

ALPINE INE-W960A/INE-W960E INE-W960E_OM (EN)
60
3.6 Saving a location as an alert point
You can save any map location as an alert point (for example a speed camera or a railway
crossing).
1. Browse the map and select a location. The red Cursor appears there.
2. Tap
.
3. Scroll down the list and tap
.
4. On the newly opened screen, select the type of the alert point, the direction from which
you expect the alert, and (if applicable) the speed limit for this alert point.
5. Tap
to save the location as a new alert point.