Alpine INE-W987A - Apple Carplay Setup; HDMI Setup; Switching the Visual Input Signal System; System Setup

41-EN
You can make this setting only when AUX is set to “On” ( ). See “AUX
Setup” (page 40).
Setting item:
Signal
Setting contents:
Auto (Initial setting) / NTSC/PAL
HDMI Setup
[HDMI] is selected on the Sources Setup Menu screen in step 1. See
“Sources Setup” (page 38).
You can set the name of an external device connected via HDMI.
Setting item:
HDMI
Setting contents:
HDMI (Initial setting) / DVD
Apple CarPlay Setup
[Apple CarPlay] is selected on the Sources Setup Menu in step 1. See
“Sources Setup” (page 38).
Before connecting an iPhone 5 or later, turn on this item to use the
Apple CarPlay function.
Setting item:
Apple CarPlay
Setting contents:
On (Initial setting) / Off
• This setting is invalid for music playing of iPhone 4S and iPod.
[System] is selected on the Setup main screen in step 3. See “Setup
Operation” (page 25).
System Setup Menu screen
<Setting items>
*1 When you select “Camera Selector” in “Camera Select”, the setting item
is different. For details, see “Setting Multi Camera to On/Off ”
(page 43).
*2 When Camera Select is set to “Off,” you cannot select this item.
*3 You can select this item only when Camera Select is “Front” or “Rear.”
*4 You can select this item only when Camera Select is “Rear.”
*5 Set this setting after closing the Alpine TuneIt App.
1 Select the desired item.
2 To switch the setting, touch [], [], [], [], or mark the
checkboxes “Off” ( ) or “On” ( ).
• If “ ” appears, there is a further hierarchy. Touch the desired
item.
3 To uc h [] to return to the main source screen.
• To return to the previous List screen, touch []. For details, see
“About Basic Operation for List Screen” (page 17).
Switching the Visual Input Signal System
Auto: The video input signal type (NTSC or PAL) will be
automatically selected.
NTSC/PAL: Choose the video input signal type manually.
HDMI: Set when a smartphone is connected via HDMI.
DVD: Set when an external DVD player is connected.
On: Set before an iPhone 5 or later is connected, the Apple
CarPlay can be used, but the iPod source is not available
at this time. Alpine TuneIt App is not available normally
also.
Off: Set when you want to use the iPod source, etc., of the
connected iPhone 5 or later.
System Setup
Camera*
1
Camera Select
Camera Signal*
2
Guide Adjustment*
3
Interrupt (Power OFF)*
4
CAN-I/F
Default Vehicle Screen
Climate screen interrupt time
Parking sensor interrupt
Rear Seat Entertainment
Rear Seat Entertainment
Remote Sensor
Unit
External AP
HDMI selector
Application
Alpine TuneIt App*
5
The following steps 1 to 3 are common to each “Setting
item” of System Setup. See each section for details.