73-EN
01GB07IVA100R.fm
ALPINE IVA-D100R 68-05946Z50-A (EN)
When Connecting External Equipment
System Switch
When connecting an equalizer or divider using Ai-NET
feature, place this switch in the EQ position. When no
device is connected, leave the switch in the Ai position.
• Be sure to turn the power off to the unit before changing the
switch position.
Power Supply Connector
AUX Video Input Connector (AUX INPUT)
Use when connecting a back-up camera.
AUX Video Output Connector
Use when connecting an optional monitor etc.
RCA Extension Cable (Sold separately)
Reverse Lead (Orange/White)
Connect to the plus side of the car’s reverse lamp which
lights when the transmission is shifted into reverse (R).
Switches the video picture to the back-up camera. This is
linked to putting the car into reverse (R).
To Video Input terminal
To Video Output terminal
Rear monitor
(Sold Separately)
Back-up camera
(Sold Separately)
(Orange/White) REVERSE
Use only when back-up camera is
connected.
<Monitor unit>
(Yellow)
(Yellow)
01GB00IVAD100R.book Page 73 Friday, February 10, 2006 2:39 PM
To Next Page
Loading...
