29-EN
Display Example for Search Screen
[ ] is displayed if there is a hierarchical list.
Select directly by touching [ ], and its track (or folder/
file) is played back.
Scroll the list one line at a time by touching [ ] or [ ].
Scroll the list one page at a time by touching [ ] or [ ].
Touch [ ] to return to the previous list screen.
• The search function does not work on the DVD, Video CD or CD
changer. If [TOP MENU] or [MENU] is touched in the DVD-VR
mode, the unit changes to the search function. Refer to“Searching by
Programme”and “Searching by Playlist” (page 23).
• A folder list is displayed only during MP3/WMA/AAC playback when
the DVD player (DVA-5210) or changer compatible with MP3 is
connected.
Internal CD player mode
1 The track list* screen appears.
2 Touch [ ] of a desired track text*.
The selected track will be played back.
* If the CD is text compatible only.
• “TRACK” is displayed in the track text list if there is no text on
the disc.
Internal MP3/WMA/AAC/DivX Player/external MP3-
compatible DVD Player/Changer Mode
1 The folder list screen appears.
Select a desired folder and then touch [ ]. ([ ]
appears only when a file is present in the selected folder.)
The file list screen is displayed.
• Touch [
] to play back the folder directly.
2 Touch [ ] of a desired file name.
The selected file will be played back.
Rear Entertainment Function
The rear entertainment function independently routes different sources
to the front and the rear inside a car. For example, while listening to the
radio or other audio source in the front, DVD can be enjoyed in the rear
with the optional rear monitor and headphones.
1
Touch [SOURCE] on the main source screen.
The SOURCE selection screen is displayed.
2
Touch [RSE].
Rear Select display appears.
• Touching [MAIN] on the REAR selection screen will change to the
main source screen.
3
Touch the desired source such as visual (auxiliary
input, built-in DVD) to select.
• Touch [OFF] to cancel the rear entertainment function.
• When the “Setting the AUX Mode” (page 40) is set to OFF, the
auxiliary source is not displayed.
Switching Display Modes
While your vehicle is parked, touch [WIDE] on the visual
source screen.
Each touch changes the display modes as follows:
In Mode 1 (Wide), the monitor displays a normal picture wider to
fit in a wide-screen monitor by evenly stretching out the picture
horizontally.
In Mode 2 (Cinema), the monitor displays a normal picture by
stretching out the picture horizontally and vertically. This mode is
good for displaying a cinema type picture at the 16:9 ratio.
In Mode 3 (Normal), the monitor displays a normal picture at the
centre of the screen with a vertical black band at each side.
®
MODE 1 MODE 2 MODE 3 MODE 1
(WIDE) (CINEMA) (NORMAL) (WIDE)
To Next Page
Loading...
