Operation Instructions
Indicates a prohibited action (must not be
performed).
Indicates that disassembly is prohibited.
Indicates a mandatory operation (must be
performed).
Indicates that it should draw your close
attention.
Warning
In case of problems, please stop
using the device immediately.
Continued use may result in personal injury or damage to
the product. Please return the product to the authorised
Alpine dealer or nearby Alpine service center for repair.
The product is only suitable for 12V
negative-grounded vehicles.
Use within other types of vehicles may create a fire or
electrical hazard.
Please contact a professional for
wiring and installation.
This product requires professional expertise to wire
and install. Please contact the dealer from whom you
bought the product to install it safely.
Please do not disassemble or refit.
Doing so may result in product damage, fire
or electrical hazard.
Small items like bolts or screws must
be kept out of the reach of children.
If ingested, please seek Immediate medical
attention to avoid serious injury.
Please do NOT use functions t
hat
may distract you while driving.
Prohibited
Prohibited
Mandatory
Caution
Any device function that may influence your attention
must be used only when the vehicle is stopped
completely. To use these functions, make sure to stop
your vehicle in a safe area first. Otherwise, it may result
in an accident.
While driving, you must maintain
the volume at a level that allowsth
outside noise to remain audible.
It is very dangerous not to hear an emergency vehicle
alarm or road warning signal (such as a railway
crossing) and may result in an accident. Moreover,
excessively loud volume may create permanent hearing
damage or hearing loss.
Product maintainance
Please regularly clean the item with a soft, dry
cloth. For tough stains, use only water to dampen the
cloth as other solvents may result in dissolution.
Temperature
Before starting the device, please ensure
that the temperature inside the vehicle is between
-20°C and 60°C.
Repair
In the case of a problem, please do not attempt to
repair the product yourself. Please return the product to
the authorised Alpine dealer or Alpine service center.
System matching
When using low-level input signals, high-level
input signals cannot be connected. Please choose one of
the two connection methods.
Installation environment
The device cannot be installed at the
following locations:
• Under direct sunlight or near a source of heat.
• With high humidity or near a source of water.
• Dusty environments.
• Environments with violent vibration.
Types of Precautions
To Next Page
Loading...
