Alpine PWE-V80 User Manual

SUBWOOFER INSTALLATION
ACCESSORIES
SPECIFICATION
8 INCH SUPER COMPACT ACTIVE SUBWOOFER
MAX POWER OUTPUT............................................... 160W
CROSSOVER .............................................................. 30-160Hz (-12dB/oct)
PHASE ......................................................................... 0°,180°
INPUT SENSITIVITY 80mV-0.5V (Line Input)
0.9V-6V (Speaker Input)
OPERATIONAL VOLTAGE .......................................... DC 14.4V (Operational between: 11~16V)
DIMENSIONS .............................................................. 342mmX238mmX80mm
WEIGHT....................................................................... 5 Kg
Subwoofer Installation Place
Under the seat
Under the seat
In the trunk
Line controller
Speaker output wire
Caution: Subwoofer warms up during continuous usage. Please make sure
that it is not covered and the installation place provides free space to the unit.
Installation place and method must not damage electrical wirings, gasoline
tank and other objects which might cause short circuit, fire, etc.
1. Mount the installation bracket onto the bottom of the subwoofer (4 brackets, 4 screws).
2. Fix the brackets on the body of the vehicle (4 brackets, 4 screws).
10P connection couple
(Power line, remote start wire,
speaker input wire, ground wire)
5M power extension coupler (12AWG)
Remote start wire
Mounting bracket
Fixed screw (locking vehicle)
Fixed screw (locking body)
PWE-V80
Instruction Manual
Subwoofer PWE-V80
Brackets and screws

Alpine PWE-V80 Specifications

General

Product type	Pre-loaded subwoofer
Enclosure type	Enclosed
Subwoofer type	Active subwoofer
Subwoofer frequency range	50 - 100 Hz
Product color	Black
Housing material	-

Weight and Dimensions

Depth	80 mm
Width	342 mm
Height	238 mm
Weight	5000 g

Summary

SPECIFICATION

SUBWOOFER INSTALLATION

Subwoofer Installation Place

Indicates potential locations for mounting the subwoofer within the vehicle.

ACCESSORIES

CONNECTION

CONNECTIONS FOR RCA INPUT

Details on connecting the subwoofer using RCA audio input cables.

CONNECTIONS FOR SPEAKER LEVEL INPUT

Details on connecting the subwoofer using speaker-level audio input wires.

ADJUSTMENT

POWER INDICATOR

Indicates the status of the power supply to the subwoofer.

INPUT GAIN ADJUSTMENT

Procedure for setting the input signal level for optimal subwoofer performance.

LOW PASS FILTER ADJUSTMENT

Guide to setting the crossover frequency to blend subwoofer with other speakers.

PHASE SELECTOR

Instructions for setting the subwoofer's phase to match the vehicle's acoustics.