Alpine PL104T - User Manual

PL104T
100 Watt Transformer w/
Photo Cell and Timer
Limited Warranty Information
Thank you for choosing an Alpine product! We aim to please with our wide range of products
including Fountains, Birdbaths, Statuary, Pond Supplies & More. All of our products are constructed
from the highest quality materials. In the event that we have not achieved our usual standard of
excellence, we will repair or replace, at our discretion, within the warranty period. A valid proof of
purchase, with the purchase date clearly indicated, must be provided. Photos of defective
merchandise will also be required to help distinguish the actual cause of the defect. Please read
below for a detailed description of warranty coverage.
• Water Damage
Alpine products are not manufactured to withstand extreme temperatures. Improper
storage that allows water to freeze within a product may cause damage and is considered
negligence and will, therefore not be covered under this warranty. The use of “hard water”
and/or caustic cleaners can affect the paint or other finishes. Failure to keep the unit clean,
and use of such additives/cleaners, will also void the warranty. Please note: for fountains,
it is normal for some splashing to occur and protecting the immediate surfaces is not the
responsibility of Alpine Corporation
• Paint & Color (Retention and/or Loss)
The use of water will cause natural erosion to the color. This area can be touched up
using standard paint. The paint is designed to protect the entire finish against breakdown
of color. As with any product, all finishes with time will gradually fade and discolor. The
warranty will only cover against severe or complete fading within the first year from date of
purchase with the above exclusion.
• Procedure/Service
Should a warranty/claim be needed, you should contact the retailer from whom you
purchased the product. If that is not an option, you can contact Alpine Corporation at
www.alpine4u.com. When contacting Alpine Corporation, you must be prepared to
show proof of purchase, provide photographs and any other information needed to
validate your claim. This may be necessary to distinguish between a partial or complete
replacement of a defective product. The warranty does not cover any items with multiple
parts; the warranty will ONLY cover the individual component of the unit/item that may be
defective. Replacement parts can be made available to a consumer through the original
selling party, or an approved parts retailer. If this is not an option, contact our customer
service department. Item is covered under one year limited warranty from the date of
purchase. When requesting replacement parts due to a warranty claim after 30 days of
purchase, credit card information will be requested for shipping charges.
• Not Covered Under Warranty
The limited warranty will NOT cover cases of damages due to
1. Damages caused in Transit
2. Inadequate care and/or neglect
3. Environmental and/or natural elements
4. Immersion in water, unless specified
5. Improper Installation/Storage and/or Maintenance
This warranty is void if the product has been damaged by accident, misuse, negligence, improper
installation and/or modifications have occurred. This includes any and/or all defects arising out of
freezing water damage, hard water damage, failure to keep the unit clean and free of harmful
additives such as bleach, chlorine, etc…. which affects the paint and/or parts. This warranty also
does not cover any additional charges or installation, removal, disposal and/or shipping costs or
consequential damage associated with any warranty claim
4

Summary

Limited Warranty Information

Warranty Exclusions

Details damages not covered, including water, paint issues, and transit.

Warranty Claim Procedure

Steps for filing a warranty claim, including proof of purchase and photos.

Using Your Outdoor Low Voltage Transformer Product

Product Setup and Operation

Instructions for setting up and operating the photo timer sensor with various modes.

Troubleshooting and Specifications

Guidance on common issues, circuit breaker reset, and operating limits.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features
5. Warranty Exclusions

The Alpine PL104T is a 100 Watt Transformer designed for outdoor low voltage lighting applications, featuring a built-in photo cell and timer for automated operation. This device is engineered to provide a functional and intelligent photo time sensor for garden light use, meeting high standards of functionality and design with a simple structure for easy operation.

Function Description:

The PL104T transformer converts standard household electricity (120VAC 60Hz) to low voltage (12VAC) suitable for garden lights. Its primary function is to power outdoor low voltage lighting systems up to 100 watts (not exceeding 100VA). The integrated photo cell detects ambient light levels, allowing the unit to automatically turn lights on when it gets dark. The timer function provides additional control, enabling users to set specific durations for the lights to remain on after dark. This combination of features offers convenience and energy efficiency for outdoor lighting.

Important Technical Specifications:

• Input Power: 120VAC, 60Hz
• Output Power: 12VAC
• Maximum Load: 100 Watts (100VA)
• Operating Temperature Range: 14°F to 104°F (-10°C to 40°C)
• Safety Listing: UL Listed (E181950), suitable for indoor or outdoor use.

Usage Features:

The transformer features a rotary control switch (Fig 4) that allows users to select various operating modes:

• OFF: The power is off, and the bulb will not light.
• ON: The power is on, and the bulb will always light, regardless of ambient light.
• AUTO: The bulb will automatically light when the sensor detects a dark environment and remain on until it detects light again.
• 4H: The bulb will automatically light when the sensor detects a dark environment and will turn off after four (4) hours.
• 6H: The bulb will automatically light when the sensor detects a dark environment and will turn off after six (6) hours.
• 8H: The bulb will automatically light when the sensor detects a dark environment and will turn off after eight (8) hours.

The device includes a circuit breaker for safety. If a bulb does not light up, checking the circuit breaker is the first troubleshooting step. In the event of a short circuit, the secondary breaker will trip and shut off the system. To reset, the cause of the short circuit must be removed, and then after waiting 4 minutes, the 'Circuit Breaker' button should be pressed.

Maintenance Features:

The product is designed for durability, but proper care is essential to ensure its longevity and maintain warranty coverage.

• Environmental Protection: Alpine products are not manufactured to withstand extreme temperatures. Improper storage that allows water to freeze within the product may cause damage and is considered negligence, which voids the warranty. The transformer is cold and heat resistant within its specified operating temperature range (14°F to 104°F).
• Cleaning: The use of "hard water" and/or caustic cleaners can affect the paint or other finishes. Failure to keep the unit clean and the use of such additives/cleaners will void the warranty.
• Paint and Color Retention: The use of water will cause natural erosion to the color over time. While the paint is designed to protect the finish, gradual fading and discoloration are normal. The warranty only covers severe or complete fading within the first year from the date of purchase, excluding natural erosion. Touch-ups can be done using standard paint.
• Warranty Service: Should a warranty claim be needed, the user should contact the retailer from whom the product was purchased. If not possible, Alpine Corporation can be contacted directly via www.alpine4u.com. Proof of purchase with a clearly indicated date, along with photographs of the defective merchandise, is required to validate a claim. The warranty covers only the individual component of the unit that may be defective, not items with multiple parts. Replacement parts may be available through the original seller or an approved parts retailer. If a replacement part is requested due to a warranty claim after 30 days of purchase, credit card information will be requested for shipping charges.

Warranty Exclusions:

The limited warranty does NOT cover damages resulting from:

1. Damages caused in Transit.
2. Inadequate care and/or neglect.
3. Environmental and/or natural elements.
4. Immersion in water, unless specified.
5. Improper Installation/Storage and/or Maintenance.

The warranty is void if the product has been damaged by accident, misuse, negligence, improper installation, or modifications. This includes defects arising from freezing water damage, hard water damage, failure to keep the unit clean and free of harmful additives (e.g., bleach, chlorine) that affect the paint and/or parts. The warranty also does not cover additional charges or installation, removal, disposal, shipping costs, or consequential damage associated with any warranty claim.

Alpine PL104T Specifications