Do you have a question about the Alpine SHS-N207 and is the answer not in the manual?
Easy storage design that folds the ear-pieces flat.
Automatically turns off power when no signal source is detected.
Allows selection between two audio sources (A or B).
Specifies the wireless transmission technology and carrier frequencies used.
Details input voltage, power output, frequency response, and distortion levels.
Identifies and describes the main controls on the headphone receivers.
Details the source selection, power controls, and volume adjustment.
Instructions for inserting AAA batteries, emphasizing correct polarity.
Guides on folding earpieces for storage and wearing.
Setting volume low before wearing and powering on for safety.
Critical warnings for drivers regarding headphone use and video product installation.
Prohibits disassembly, warns against moisture, and advises on proper use.
Keep small objects from children and use caution with headphone volume.
Avoid high temperatures and stop use if a problem arises.
Do not mix batteries and ensure correct polarity for safety.
Specifies products covered, duration, eligibility, and what is included.
Lists common exclusions like shipping damage, misuse, and acts of nature.
Steps and responsibilities for getting the product repaired or replaced.
Details limitations on implied warranties and exclusion of certain damages.
Provides phone numbers and website for customer service inquiries.
Notes the equipment's compliance with FCC rules for digital devices.
| Wireless Technology | Bluetooth |
|---|---|
| Channels | Stereo |
| Frequency Response | 20Hz - 20kHz |
| Microphone | Yes |
| Water Resistance | No |
| Driver Unit | 40mm |
| Impedance | 32 ohms |