Alpine SPE-6000 User Manual

ff#MLPINE ~
IMPORTANT NOTICE!
PLEASE READ FIRST BEFORE INSTALLING SPEAKERS
Congratulations on your purchase of high quality speakers from
Alpine. Your listening satisfaction is important to us. In order to
maximize and maintain peak speaker performance the following
guidelines are being provided. Please read this notice carefully
before operating the speakers.
1. Do not over-drive the amplifier. Over-driving the amplifier will
result in distortion or clipping and can damage any speaker.
2. Make sure gain contr-ols are properly set. (Follow
instructions in amplifier owner's manual.)
3. Make sure that the speaker is properly rated for the amplifier.
4. Make sure that volume, bass, treble, equalization or
crossover settings do not cause the amplifier to over-drive.
Failure to follow these guidelines may result in burned or damaged
speaker voice coils which will void your warranty.
If further assistance is necessary, please contact your Alpine
authorized dealer.
68-00493264-A (Y)

Alpine SPE-6000 Specifications

General

Tweeter	Yes
Impedance	4 Ω
Rated power	60 W
Sensitivity	88.5 dB
Speaker type	2-way
Frequency range	68 - 20000 Hz
Tweeter magnet type	Neodymium
Quantity per pack	2 pc(s)
Woofer magnet type	Ferrite
Subwoofer driver diaphragm material	Polypropylene
Shape	Round
Product color	Black
Voice coil type	Square Voice Coil Wire
Separate components	-
Amplifier included	No

Weight and Dimensions

Mounting depth	61 mm
Mounting hole diameter	141 mm