GRILL INSTALLATION
STEP 1 :
A.
First remove the rubber ring. Then
install the grill on the speaker to
properly seat gasket for installation.
B.
Prepare the cabinet.
STEP
4:
Screw down the speaker.
STEP 2 : Connect the electric wires.
STEP 3 :
A.
Set the speaker into the cabinet.
B.
Carefully remove the grill.
STEP 5 : Center the grill along the
vertical axis
of
the speaker
and place down.
STEP 6 : Press down on the grill evenly
on opposite sides. Then press
down around the perimeter to
fully seat the grill.
:~
-I
1/
To Next Page
Loading...
