Alpine TDM-7529T User Manual

TDM-7529T/F
TDOM-7526T/W/F
Terminal Description
Ground terminal.
| O- Output terminal for system clock OSC.
oa Input terminal for system clock OSC.
; [0] Charge pump output terminal for PLL synthesizer.
No connection.
44 Vpp2 | | Power supply terminal.
eel
(aaa
Te
fe 2 NC — | No connection.
aes
44
pas] uD O | SEEK switching terminal for LOCAL / DX.
— |W coedn
L.P.F. switching terminal for LW Band.
1F / SD output control terminal.
Oo
47
— | No connection.
L.P.F. switching terminal for LW Band.
L/D
NC
FM/AM Power supply switching terminal. (For FM / AM)
No connection.
INH signal output terminal for LCD driver. (IC402)
CE signal output terminal for LCD driver. (IC402)
DATA signal output terminal for LCD driver. (IC402)
CLK signal output terminal for LCD driver. (IC402)
| WeocK
A. MUTE
1 | POWER.IC ON
No connection.
Audio mute signal output terminal.
Stand-by control signal output terminal for Power IC. (IC210, 211)
72 | POWER.CONT
73
Power supply control terminal.
No connection.
75 NOSE.ON
76 | KEY-INAD 1
KEY-IN AD 2
Key matrix signal input teminal. |
78 | KEY-INAD3
79 MODEL 0
Nose setting detection terminal.
y
Model set up terminal.
pee | wone
Note : © : For TOM-7529T Model Only, (): For TDM-7529F Model Only, @: For TDM-7526T Model Only,
& : For TDM-7526W Model Only, ME: For TOM-7526F Model Only, Others:Common.
-~19—

Alpine TDM-7529T Specifications

General

Brand	Alpine
Model	TDM-7529T
Category	Car Receiver
Language	English