Alpine UTE-73BT - Settings; General Setup Options

22-EN
ALPINE CDE-170 68-40368Z01-A (EN) 128x182
FW UP
Enters
f
Updati
compl
e
ignition
USB de
Audio S
This setup
is off and t
EQ PRESE
Selects
curves
[USER]
,
[JAZZ],
[COUNT
The eq
for eac
3BAND P
E
Adjusts
each af
BAND:
Settin
g
FREQ],
BALANC
E
Adjusts
FADER
Adjust
s
SUBWOO
SUBW
Adjust
s
[OFF], [
SUBW
Select
s
[REVER
LPF FR
Select
s
[80Hz],
HPF FREQ
Selects
frequen
Settings
Canceling the DEMO Mode
You can cancel the demonstration display which
appears when the source is off and the clock is
displayed.
1 Press and hold /SETUP for at least 2
second, rotate the control dial to select
[GENERAL], then press it.
2 Rotate the control dial to select [DEMO
MODE], then press it.
3 Rotate the control dial to select [DEMO
OFF], then press it.
The setting is complete.
4 Press (back) twice.
The display returns to normal reception/play
mode.
Basic Setting Operation
You can set items in the following setup
categories:
General setup (GENERAL), Audio setup (AUDIO),
Display setup (DISPLAY), BLUETOOTH setup
(BLUETOOTH)
1 Press and hold /SETUP for at least 2
seconds.
2 Rotate the control dial to select the setup
category, then press it.
The items that can be set differ depending on
the source and settings.
3 Rotate the control dial to select the
options, then press it.
To return to the previous display
Press (back).
General Setup (GENERAL)
DEMO MODE (demonstration)
Activates the demonstration: [ON], [OFF].
CLOCK ADJ (clock adjust) (page 9)
CAUTION ALM (caution alarm)
Activates the caution alarm: [ON], [OFF] (page
9).
(Available only while the source is off and the
clock is displayed.)
BEEP
Activates the beep sound: [ON], [OFF].
AUTO OFF
Shuts off automatically after a desired time
when the unit is turned off: [ON]
(30 minutes), [OFF].
USB MODE
Changes the USB mode: [MSC/MTP],
[ANDROID].
(Available only when the USB source is
selected.)
RDS CT (clock time)
Activates the CT function: [ON], [OFF].
SXM PARENTAL (CDE-172BT only)
Sets the parental lock to [ON], [OFF], and edits
the passcode (page 14).
(Available only when SiriusXM is selected.)
SMX SIGNAL (CDE-172BT only)
Displays the current status of the SiriusXM
signal strength:[NO SIGNAL] (signal level 0),
[WEAK] (signal level 1), [GOOD] (signal level 2),
[EXCELLENT] (signal level 3).
(Available only when SiriusXM is selected.)
SXM RESET (CDE-172BT only)
Initializes the SiriusXM Connect Vehicle Tuner
settings (preset channels/parental lock): [YES],
[NO].
(Available only when SiriusXM is selected.)
FIRMWARE
(Available only while the source is off and the
clock is displayed.)
Checks/updates the firmware version. For
details, consult your nearest Alpine dealer.
FW VERSION (firmware version)
Displays current firmware version.