7
ASSEMBLING & USING YOUR PRODUCT
8. Make sure the water runs clear during operation.
Because there is air in the pump and water lines, it
can take up to 5 minutes for the pump to expel the
air completely. Then, water will ow properly.
9. Adjust the pump’s ow control to produce an
attractive effect without splashing.
10. Set the pump on its suction cup feet on the bottom
of the reservoir and press down to secure it.
11. Congratulations, your fountain is now complete.
Don’t forget to add water regularly, as water will
evaporate over time.
To Next Page
Loading...