EasyManua.ls Logo

Alpine X209-WRA-OR - User Manual

Alpine X209-WRA-OR
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Jeep Wrangler
WRANGLER 1/22
Jeep Wrangler
X209-WRA-OR
X209-WRA-ORSXM
9” Restyle In-Dash System
Installation Manual
Model: Wrangler
Model Year: 2011-2018
Note
Design and specifications are subject to change without notice for improvement.
To Ensure Safe Use, Always Follow These Precautions
The installation of this product requires specialized skills and experience. We recommend that you have the
product installed by an Alpine authorized dealer.
Before you use this product, be sure to carefully read this installation manual and the separate user's manual
so that you can use the product correctly. Alpine Electronics bears no responsibility for problems that arise as
a result of failure to follow the instructions in the manuals.
This manual includes a number of symbols that are intended to help you use the product safely, to prevent
harm to you and others, and to protect against damage to property. These symbols and their meanings are
listed below. Make sure you fully understand these symbols before you begin reading the main text.
Explanations of Injury and Damage That May Result from Incorrect Use
Warning
Ignoring the content marked by this indication and using the product incorrectly is
expected to lead to death or serious injury.
Caution
Ignoring the content marked by this indication and using the product incorrectly is only
expected to lead to injury or property damage.
Jeep
Model Year
Wrangler 2011 - 2018
* The specified vehicles have been tested and have met compatibility specs at the time of testing. Compatibility is
not guaranteed if the manufacturer has made production changes to the listed vehicles above.
Warning: Before you begin wiring, remove the ground wire from the negative
terminal of the battery. Failing to do so can lead to electric shock, injury or damage
to equipment.
Introduction
Congratulations on purchasing the X209-WRA-OR. This installation manual is designed to take you through the
step-by-step installation of X209-WRA-OR into a 2011-2018 Jeep Wrangler. Please familiarize yourself with the
owners manual and if you still have additional questions please call 1-800-TECH-101.
Question and Answer IconNeed help?

Do you have a question about the Alpine X209-WRA-OR and is the answer not in the manual?

Summary

Introduction and Safety Overview

Safety Warnings and Symbol Explanations

Explains critical safety warnings and symbols used throughout the manual.

General Safety Precautions and Forbidden Actions

Programming the iDatalink Maestro Module

Weblink Module Programming Steps

Step-by-step guide to program the Maestro module using the Weblink platform.

Component Locations and GPS Installation

Factory Unit Disassembly Process

Installation Preparation Steps

Main Installation Steps

X209-WRA-OR Wiring Diagram

Main Vehicle Connector Pinouts

Detailed wiring diagram showing connections to vehicle connectors.

Optional HDMI Interface Wiring

Detailed Wiring Information

Wire Harness Pin Outs

Comprehensive Connector Pin Assignments

Detailed pinout tables for all wire harnesses used in the installation.

Specific Component Connections

KAC-001 Accessory Connection

Steering Wheel Control Configuration

Steering Wheel Button Functionality

Explains how steering wheel buttons are mapped and function.

Setup and Troubleshooting Guide

Initial System Setup Procedures

Steps to perform after installation for initial system setup.

Troubleshooting Common Installation Issues

Solutions for frequently encountered problems during installation and operation.

Troubleshooting Guide Continued

Advanced Troubleshooting Scenarios

Addresses more complex issues and their remedies.

Alpine X209-WRA-OR Specifications

General IconGeneral
BrandAlpine
ModelX209-WRA-OR
CategoryOther
LanguageEnglish