Alstom FKG1X - Page 105

Installation
Checking for presence of SF
6
gas in poles
G31--061EN04
2/4
02--2011
© ALSTOM 2010. All rights reserved. Informat
ion contained in
this document is indicative only. No
representati
on or
warrant
y is
given or should
be
relied on that it is complete or correct or will apply to any particular project. This will depend on the technical and commercial circumstances. It is
provided without liabili
ty and
is subject to
change without notice. Reproduction, use or disclosure to
third parties, without express writt
en authority, is
strictly prohibited.
 GRID
Pole checking when the cases are opened at site
Preparing the pole
Remove
the c
over
and
the s
ide
panels
of the
case.
Remove
partially
packag
-
ingprot
ec
tio
n
to
fre
e
the
ho
us
in
g
to
ca
n
rea
ch
thefilli
ng
de
vic
e
int
o
theoper
at-
ing
mechan
ism..
.
FKG1N/F/X/XV/XW
Visual in
spection
of the pôles
It is of prime importance that the presence of SF
6
gas in pole be
verified before going any further with installation.
SF6 three phase
checking
or
SF6
one
phase
checking
FK3--12