Alstom FKG1X - Page 119

Installation
Assembly of th
e circuit b
reaker on-
-
site
G31--201EN12
2/20
04--2011
© ALSTOM 2010. All rights reserved. Informat
ion contained in
this document is indicative only. No
representati
on or
warrant
y is
given or should
be
relied on that it is complete or correct or will apply to any particular project. This will depend on the technical and commercial circumstances. It is
provided without liabili
ty and
is subject to
change without notice. Reproduction, use or disclosure to
third parties, without express writt
en authority, is
strictly prohibited.
 GRID
Inspecting civil engineering works
Rewinder
A
VOID
ANY
DUST
PRODUCTION
AND
MASSOR
Y
WORK
DURING
CIR-
CUIT-
-BREAKER
ERECTION.
Check the distances
between axles of ex-
ixting busbars
Ch
ec
k
the
va
lue
s
for
X,
Y
,
an
d
Z,
di
sta
nc
es
be
twe
en
ax
le
s
of
ex
ix
tin
g
bu
sb
ars
and dimensioning of bay’s attachment points with sighting gear
(see
VS...GAD01D
).
VS...GAD01D
Circuit-breaker
General arrangement
frame and cubi-
cle fixation points
Evenness of the
Civil Engineering
Structures
Using shims, adjust the differences in evenness of the concrete structures
with a tolerance of:
±
1mm, and with a shims’ height adjustment difference
of: 0 + 15mm