Alstom FKG1X - Page 219

Installation
Electr
ical
contact densimeter threshold
inspectio
n
G51
-
-1
01EN03
2/4
02--2011
© ALSTOM 2010. All rights reserved. Informat
ion contained in
this document is indicative only. No
representati
on or
warrant
y is
given or should
be
relied on that it is complete or correct or will apply to any particular project. This will depend on the technical and commercial circumstances. It is
provided without liabili
ty and
is subject to
change without notice. Reproduction, use or disclosure to
third parties, without express writt
en authority, is
strictly prohibited.
 GRID
Isolating the
densime
ter
Process
T
o
isolate
the
densime
ter
only
unscre
w
the
nuts
(1)
on
the
3
poles,
which
close the valves “DILO” and densimeter isolation (2).
1
2
1
POLE 1
POLE 3
POLE 2
G
A
S
NOT
UNSCREW
G
A
S