Alstom FKG1X - Page 221

Installation
Electr
ical
contact densimeter threshold
inspectio
n
G51
-
-1
01EN03
4/4
02--2011
© ALSTOM 2010. All rights reserved. Informat
ion contained in
this document is indicative only. No
representati
on or
warrant
y is
given or should
be
relied on that it is complete or correct or will apply to any particular project. This will depend on the technical and commercial circumstances. It is
provided without liabili
ty and
is subject to
change without notice. Reproduction, use or disclosure to
third parties, without express writt
en authority, is
strictly prohibited.
 GRID
Placing the densimeter in communication with the SF
6
volume
Process
T
o
put
in
communi
cation
the
densim
eter
tighten
torque
the
nuts
only
(1)
on
3 poles, which allow to open the valves “DILO” and put into communication
of the densimeter (2).
1
2
1
POLE 1
POLE 3
POLE 2
G
A
S
NOT
UNSCREW
G
A
S
11 daNm