Alstom FKG1X - Page 234

Maintenance
Disassembly and assembly of the GCB equipments
G51
-
-5
00EN01
3/10
02--2011
© ALSTOM 2010. All rights reserved. Informat
ion contained in
this document is indicative only. No
representati
on or
warrant
y is
given or should
be
relied on that it is complete or correct or will apply to any particular project. This will depend on the technical and commercial circumstances. It is
provided without liabili
ty and
is subject to
change without notice. Reproduction, use or disclosure to
third parties, without express writt
en authority, is
strictly prohibited.
 GRID
Remove of the equipped supports,
continued
Remove
the roof
cover
s
SEE MODULE FOR INTERVENTION “DISASSEMBLY OF THE ENCLO-
SURE COVERS”
.
Capacitors
disconnecting
Disconnect the braides from the capacitors
(bolts A1)
:
(Applicable according to the user configuration)
x1
CHC
M10-
-35
.
A1
.
A1
.
A1
.
A
Surge arestors
disconnecting
Disconnect the braides from the surge arrestors
(bolts B1)
:
(Applicable according to the user configuration)
x1
CHC
M8-
-20
.
B1
.
B1
.
B1
.
B
Continued on next page.