Instructions on the handling of used SF
© ALSTOM 2010. All rights reserved. Informat
this document is indicative only. No
relied on that it is complete or correct or will apply to any particular project. This will depend on the technical and commercial circumstances. It is
change without notice. Reproduction, use or disclosure to
third parties, without express writt
gas switchgear, take the precautions
switchgear only after the gas has been evacuated and the
Put the ventilation system in operation or ensure that fresh air circulates
products is opened (e.g. circuit--breaker).
Wear suitable fresh air breathing apparatus if there is even the slightest
possibility that personnel working on the equipment could be put in danger
Wear special overalls when working on opened--up SF
contains powdery decomposition products. After completing work remove
Items (such as rags, vacuum cleaner, throw--away--overalls, gloves, etc.)
items neutralize in a 3 percent soda solution for 24 hours. verify the degree
of neutralization after 24 hours. When soda is added, no bubbles should be
result. If there are bubbles repeat the neutralization.
Under all circumstances ensure that the decomposition products neither
come in contact with skin, eyes, clothes, nor that they are swallowed or
away with plenty of water.
It is advisable to wash face, neck, arms and hands with soap and plenty of
water before work--breaks and after stoppage of work.