Alstom GEM80-400 Series User Manual

GEM80-400 Safety Instructions
Issue 3 04/99 ALSPA GEM80-400 SERIES CONTROLLERS TECHNICAL MANUAL Page v
The product must not be used as a single item safety system. It may be used as
a component in a voting safety system. Additional control and protective
devices must be provided in accordance with the safety requirements of the
installation.
Changes by means of the application software are admissible.
During operation all covers and doors must be closed. If covers are removed
and not replaced before power is reapplied there is danger of serious personal
injury and damage to property. Your attention is also drawn to the
electromagnetic emission and susceptibility screening provided by the
enclosure. These may be compromised when covers are removed or enclosure
doors are open.
7. Maintenance and service
The information given in the documentation for maintaining and servicing the
product must be followed.
8. Disposal
Local regulations must be followed when disposing of the product.
This technical manual should be regarded as part of the product. It should be
stored with the product and passed on to any subsequent owner or user of the
product.
Any question or doubt should be referred to ALSTOM DRIVES & CONTROLS

Alstom GEM80-400 Series Specifications

General

Brand	Alstom
Model	GEM80-400 Series
Category	Controller
Language	English