Alstom MiCOM P50 Agile P15D - Page 108

5 Configuration
P50 Agile P15D
5-72
P15D/EN TM/B
2.4.5 Edit/View Configuration menu settings
2.4.5.1 Edit Settings
V00431
CONFIGURATION
Active Settings
Group 1
Restore Default
No Operation
Setting Group 1
Enabled
Setting Group 2
Enabled
SET For Save
RESET For Cancel
OK

Password = 0000

System Config
Enabled
Overcurrent
Enabled
Earth Fault
Enabled
Thermal Overload
Enabled
Cold Load Pickup
Enabled
Measure’t Setup
ABC
UnderCurr Prot
Enabled
